AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
  • Load image into Gallery viewer, AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
  • Load image into Gallery viewer, AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
  • Load image into Gallery viewer, AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
  • Load image into Gallery viewer, AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)
  • Load image into Gallery viewer, AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)

AirTag Case for 2021 Apple TV Siri Remote (2nd Generation) (STL Download)

Regular price
$1.99
Sale price
$1.99
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

THIS IS A DOWNLOADABLE STL FILE!

This 3D-printable case is designed to fit the NEW 2021 2nd Generation Apple TV Siri Remote and hold an Apple AirTag. The AirTag clicks satisfyingly into place, and the Siri Remote fits snugly and securely overtop. The recess for the AirTag is deep enough that the AirTag orientation is reversible, so you can keep the metal side exposed in the opening, or flip the AirTag around to show off your custom engraving! An opening on the back is sized to perfectly fit an Apple branded Lightning charging cable, so you can charge the remote without removing the case.

The case fits the NEW 2021 2nd Generation Siri Remote, it will not fit the older gray remotes or the black glass 1st Generation Siri Remote. A compatible remote is featured in the listing photos. The Apple TV Siri Remote and AirTag ARE NOT INCLUDED! This listing is for the digital download of the case's STL file only.

Dimensions: 137.5mm x 38mm x 18.5mm (LxWxH)

Recommended print settings for PLA/PLA+ are 20% infill with 0.12mm layer height. If you orient the object flat on the bed with the bottom facing down, it will print without supports.

This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. Reselling physical reproductions of this design is not permitted.